Overview
High Viscosity Technology liners are tailored to decant high viscous products, such as honey, caramel, yoghurt, shampoo, lubricants and adhesives.
Features and Benefits
+ Utilising a form-fit shape with internal air channels that when pressurised, moves the high viscous product towards the front outlet of the containers, maintaining a consistent flow of product. Please note: A separate inflation device is required
+ Tailored to decant high viscous products, such as honey, caramel, yoghurt, shampoo, lubricants and adhesives
Use Case
Pallecon compatibility: Intercon / iconic / UNIPMV
Regulatory requirements: AS 2070-1999; 21 CFR 177.1520; (EC) No 1935/2004; (EU) No 10/2011
Transportation description: Transport at 40 °C or less
Chemical exposure: Not specified
Radiation requirements: None
Film Specification
Layer 1 (Outer): Polyani Standard™ 80 μm Transparent
Layer 2 (Middle): Polyani Standard™ 80 μm Transparent
Layer 3 (Inner): Polyani Standard™ 125 μm Transparent
Liner Customisation
± 15 mm dimension tolerance
Inlet Port Fitments
2” BSP Gland (Square)
2” BSP Bung
2” BSP Gasket
Outlet Port Fitments
Base for PP Maxi Valve
PP Maxi Valve
2” Clip Collar
Inflation Port Fitments
ALC Jumbo Valve
Dressing Materials
Fitments to be covered with protective aerothene sheets and elastic bands
All pallets to be wrapped
Carton and pallet packed with protective corners
Labelling Customisation
Box labels to feature 36 month best before date
Specifications
Nominal Capacity and Weight
Packaging, Specification and Estimated Loaded Mass
Folding, FSPEC-006 Accordion folding method, 2.3 kg
Carton, CHEP Pallecon Carton, 15.2 kg
Pallet, 1155 mm x 1155 mm, 368.8 kg
Container, 20 ft GP, 3688 kgConfiguration and Stacking
Quantities
Liners: 6 Liners Per Carton, 144 Liners Per Pallet, 1440 Liners Per Container
Cartons: 24 Cartons Per Pallet, 240 Cartons Per Container
Pallets: 10 Pallets Per ContainersTemperature Range
Minimum / Maximum°C / °C 32 °F / 32 °FFilling temperature: 70 °C Max
Min. exposure temp: -30 °C
Max. exposure temp: 70 °C
Notes
Materials
1000L Triple Layer LLDPE or Polyethylene Airmax Liner with 2” BSP Top Filll and Maxivalve Bottom Outlet Discharge
Specifications
Manufactured on behalf of CHEP in a GFSI BRC and FDA IMS certified facility. These specifications have not been independently verified or tested by CHEP and no confirmation of suitability for a particular application is provided. Please undertake your own testing and analysis to ensure suitability. Further detail may be able to be supplied on request.
Please enter your details below